That is 23.2 Mbps and 20.8 Mbps respectively. Laptop =WiFi=> router =LAN=> server 2.6 MB/s Still about 5 meters away from the router. The file copy from laptop using WiFi to LAN server attached directly to WiFi router was about 2.6 MB/s fast. Server =LAN=> router =WiFi=> laptop 2.9 MB/s The file copy from LAN server attached directly to WiFi router to my laptop was about 2.9 MB/s fast. The results are not that bad but not great either. I next tested the performance of this simple single antenna Realtek chip using NFS large file transfer in thunar(1) file manager. One last step with DNS and we will test the connection with ping(8) command. Lets add LAYER 3 with IP address using dhclient(8) command.ĭHCPDISCOVER on wlan1 to 255.255.255.255 port 67 interval 3ĭHCPREQUEST on wlan1 to 255.255.255.255 port 67īound to 10.0.0.9 - renewal in 3600 seconds. Media: IEEE 802.11 Wireless Ethernet MCS mode 11ng Protmode CTS ht20 ampdulimit 64k ampdudensity 4 shortgi -stbc -ldpc Regdomain FCC country US authmode WPA2/802.11i privacy ONĭeftxkey UNDEF AES-CCM 2:128-bit txpower 30 bmiss 7 scanvalid 60 We should now have network LAYER 2 connected and wpa_supplicant(8) should be running in a background and wlan1 interface should have associated status.Ĥ8693 4 S 0:00.43 wpa_supplicant -i wlan1 -c /etc/wpa_nfĥ0687 4 S+ 0:00.00 grep -color wpa_supplicant + continued wpa_supplicant -i wlan1 -c /etc/wpa_nf Zsh: suspended wpa_supplicant -i wlan1 -c /etc/wpa_nf Wlan1: CTRL-EVENT-CONNECTED - Connection to d8:07:b6:b8:f4:81 completed Wlan1: WPA: Key negotiation completed with d8:07:b6:b8:f4:81 Wlan1: Trying to associate with d8:07:b8:b8:f4:81 (SSID=' wireless' freq=2442 MHz) Media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) Regdomain FCC country US authmode OPEN privacy OFF txpower 30 bmiss 7 I will create wlan1 device as wlan0 is already taken by the other Intel 6300 card. Lets connect to some wireless network with this Realtek chip.
Its now listed as rtwn0 as its supported by the rtwn(4) driver on FreeBSD. Ugen2.3: at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) … and some more information from usbconfig(8) command. We will now attach Realtek RTL8188CUS chip and will check whats coming in dmesg(8) command. My ThinkPad W520 laptop already has Intel 6300 with 3×3 antennas and 802.11n standard WiFi card supported by iwn(4) driver. This is for 12.2-RELEASE version but it worked the same for 11.1-RELEASE 3 years ago. I will now show you how it works on FreeBSD.
0 kommentar(er)
